Перейти к содержанию Перейти к статье

ATIFlash 4.17

Служебная утилита для работы с BIOS видеокарт ATI|AMD в DOS

Загрузить ATIFlash 4.17

ATIFlash — Служебная утилита для работы с BIOS видеокарт AMD (ATI) в DOS.

Последнее обновление: 28.11.2013

3.79
— Fix issue with flashing Atmel AT25F512B ROMs

3.78
— Fix issue with flashing SST ROMs

3.77
— Fix -mb flag for Evergreen series asics when modifying SSID and SSVID

3.76
— Add support winbond W25X80A

3.75
— Add «-lockrom» and «-unlockrom» in Atiflash to lock rom for protection

3.70
— Fix: correctly report flash error code under linux
— Fix: correctly detect PCI devices under linux
— Fix: — Fixed segmentation fault when doing -pa -pavbpn on a gfx card with an invalid vbios part number

3.67
— update RV790 DID

3.66
— update BN number to 128

3.65
— Add RV740

3.64
— Fix Flash on AT25FS010N

3.63
— Add New ROM support for Atmel AT25FS010N

3.62
— Fix the save function to save bios > 64K
— Fix the RV710 flash BIOS configuration to ensure it didn’t triggle CTF

3.61
— Fix mb option to save the entire rom size if rom size is bigger than bios size

3.60s
— Add support for RV710

3.60
— Use SCLK to flash BIOS on RV730 only (SCLK will be scaled down while flashing the BIOS)

3.59
— Add RV730 support

3.58
— Fix pa parameter, synchronize the same behaviour as ATIWinFlash

3.57
— Add R700 Support
— Reduce size

3.56
— Fix corrupted zip file. Same release as 3.55
— Add option (excl_memtrain_dtable) to keep memory training information while flashing new bios
— Add partial check for -pavbpn

3.54
— Add «nw» in help

3.53
— Add unique identifier for Ry7xx

3.52
— Add RV770 device ID support

3.51
— Add -AMD flag to allow searching for devices with AMD vendor ID

3.50
— update SPI write sequence to check for both WREN and BUSY bits to be deasserted before verifying the write (solves issues seen with intermittent write failures)

3.49
— update description for RV670 slave devices to identify uniquely on Gemini boards

3.48
— correctly print Old and New P/N when flashing with newer bioses

3.47
— explicitly identify RV635 ASICs

3.46
— Fix problems with GPIO19 asserting the CTF signal on RV670 boards

3.45
— Fix problems with crashes on some systems when flashing onto blank ROMs

3.43
— Added -pavbpn (allows the use of -pa with VBIOS PN)
— Added support for new ROM used by multimedia cards (Quito and Lima)

3.42
— Fix -mb command for Ry6xx

3.41
— Fix Ry6xx SST support

3.40
— Fix RV610 + Rialto hang issue

3.39
— Fix RV610 write issue

3.38
— Add Quito support

3.35
— resolved -i/-ai corruption issue

3.34
-ai now displays full PCI ID information
— ATMEL flash procedurce redesigned for stability/reduced overall flash time
-ai -scansii combination will report SST/ATMEL firmware revision

3.33
— internal release

3.32
— Add flashing over 128KB

3.31
— resolved pak issues with SST/ATMEL

3.30
— update device ID support for RV630/M76 & 0x000 for Ry6xx

3.29
— Add new option -pak to build flash package

3.28
— Add new option -fa to force flashing if the ROM is already programmed
— Add new option -fm to force flashing if legacy memory config mismatch
— Add new option -fs to force flashing if SSID mismatch
— Add new option -fp to force flashing if BIOS P/N mismatch
— Add new command -pa to search and program multiple adapters according to BIOS P/N
— Add new option -padevid to search for adapters of a specific PCI device ID when used with -pa command
— Add new option -passid to search for adapters of a specific subsystem ID when used with -pa command
— Add new option -pasvid to search for adapters of a specific subsystem vendor ID when used with -pa command

3.00
— initial release

Комментариев нет

Добавить комментарий

Аватар